The DBC Marine
Evacuation Chute (MEC) System is fast becoming known as the most
efficient, easy-to-use, flexible, and cost-effective marine evacuation
system available in the world today. As a gravity-launch system
(opposed to slide and davit-mounted liferaft systems), DBC's MEC
System evacuates passengers and crew with the utmost safety in the
shortest possible time.
Here's How It
Works
A chute and platform are housed in a compact box unobtrusively stored
on the deck. During an emergency, the crew release the chute and
platform with a pull of a lever. The chute and platform fall to the
water, and the platform automatically inflates. At the same time, the
liferafts are launched from their racking system, inflated and
attached to the platform. Passengers enter the chute by way of the
housing and safely descend to the platform. They are then
dry-transferred to the liferafts with the rescue boats standing by to
assist.
DEC's MEC System takes up very little space on deck. The chute
housing is compact, and the liferafts are tidily stored on rack
out of the way of passenger or crew traffic. |
The Benefits of DBC's MEC
System Are Clear:
-
Extremely easy to use
The
system is designed for maximum efficiency with minimum effort. DBC
offers extensive crew training, however the system is less
complicated to operate, with fewer crew than other systems.
- Safety
built in
All components of the
system are fully adjustable to accommodate all wind, weather, and
sea conditions. The zig-zag design of the chute ensures the safe
descent of passengers. The chute also has a protective cover and
fender system which guards passengers against environmental hazards
including contact with the ship or effects of smoke and heat from a
fire.
-
Flexibility is key
Because DBC's system is lightweight, compact, and easily mounted
without a major alterations, it will fit on both existing and new
designs of vessels. It can also be easily transferred from vessel to
vessel.
- The
best solution for the least money
The
initial investment in an MEC System as well as the cost of
installation, maintenance and service is significantly lower than
other types of marine evacuation systems.
- First
time, every time
The
MEC System is much less complex than other evacuation systems. The
combination of simple yet sophisticated design and the high quality
of each component assures system reliability. Turnaround for any
service that is required can be within 24 hours.
- One
supplier you can trust
DBC's MEC System is a complete end to end system manufactured to
SOLAS requirements. DBC ensures all components of the system are
designed to be of the highest quality and will work effectively with
all other components of the system.
|
The
pull of a lever is all it takes to quickly and easily begin
deployment of the chute and platform.
View a drawing of the MEC system here
|
|
While the
chute falls to the water and the platform inflates, the crew
simply open the doors of the housing to provide an entrance way to
the chute. In less than five minutes the system is ready to
transfer passengers. |
|
Liferafts
are secured to the platform at the base of the chute. Passengers
descend through the chute for dry transfer to the liferafts while
the rescue boat stands by to assist.
|
|